EN 15 Bright Bars

EN 15 bright bar Chemical Composition

EN15 carbon steel carbon content is from 0.30-0.40 %. There is a high manganese content of 1.30-1.70 % which makes the material hard. EN 15 has P & S content of 0.06 % max. Steel can be damaged by a high amount of P and S, causing it to break at low-stress forces.

EN15 Chemical composition is stated below:

Element %Composition

C%: 0.30-0.40
Mn%: 1.30-1.70
Si%: 0.05-0.35
S%: 0.06 max
P%: 0.06 max

EN 15 bright bar Mechanical Properties

EN 15, also known as EN 15 (150M19) is a British Standard for a carbon steel alloy typically used in mechanical engineering applications. The standard covers the chemical composition, mechanical properties, and other requirements for the material. Some of the mechanical properties of EN 15 include:

Tensile strength: 600 – 800 MPa

Yield strength: min. 355 MPa

Elongation: min. 18%

Impact energy: min. 27 J at -20°C

It is important to note that these values can vary depending on the specific condition (such as heat treatment) of the material.

EN 15 bright bar Shapes

EN 15 bright bar is a type of steel bar that has been cold finished and polished to produce a smooth and bright surface finish. This type of bar is often used in applications that require a high level of precision and surface finish, such as in the production of shafts, gears, and other mechanical components.

The standard EN 15 covers a wide range of shapes, including round, hexagonal, square, and flat bars. Additionally, it is also possible to produce EN 15 bright bars in custom shapes and sizes to meet the specific needs of a particular application.

It should be noted that the standard refers to the material and its properties, but the shape and size of the bar can be produced as per the requirement in the industry

EN 15 bright bar Sizes

EN 15 bright bar is typically produced in a wide range of sizes to meet the needs of various industries and applications. The standard size range for round bars is typically from 3mm to 80mm in diameter. However, it is also possible to produce bars with larger or smaller diameters, depending on the specific requirements of the application.

For square and flat bars, the standard size range is typically from 3mm to 100mm in width and from 3mm to 50mm in thickness. Again, custom sizes can also be produced to meet specific requirements.

EN 15 bright bar Equivalent Grades

EN 15 (150M19) is a British Standard for a carbon steel alloy that is equivalent to the following international standards:

AISI 1020 (USA)

SAE 1020 (USA)

UNS G10200 (USA)

JIS S20C (Japan)

DIN C22 (Germany)

BS 070M20 (UK)

NF C22 (France)

IS C22 (India)

These equivalent grades indicate that EN 15 bright bar has similar chemical composition and mechanical properties to the materials listed above. However, it’s important to note that the exact equivalent grade may vary depending on the specific requirements of the application and the country or region where the material is being used.

It is also possible to find other grades that are similar to EN 15, but not exactly equivalent, these grades can be used in some specific applications where these grades can be used as a substitute of EN 15.

Our Export Market:

Germany, Spain, Italy, the United Kingdom, France, the Netherlands, Denmark, Belgium, Poland, Finland, the Czech Republic, Brazil, and the United States.

Supply cities/states

Dhand Steels, a leading bar manufacturer in  Navi Mumbai, Nashik, Thane, Maharashtra, Aurangabad, Nagpur, Mumbai, and Pune, is known for its dimensional accuracy, high quality, and sturdy construction.

  • 100% flaw-free bright bars
  •  Money-back guarantee
  •  Premium quality
  • testing Surface finishing
  • On-time delivery

Our organization is an ISO 9001:2015 ensured brilliant bar producer, exhibiting the unrivaled nature of the relative multitude of stocks it produces. To ensure that its items are protected with utilization, the organization likewise complies with extra security guidelines including HACCP.

Our Supply Cities

Ahmedabad, Surat, Vadodara, Rajkot, Bhavnagar, Jamnagar, Gandhinagar, Junagadh, Gandhidham, Anand, Navsari, Morbi, Nadiad, Surendranagar, Bharuch, Mehsana, Bhuj, Porbandar, Palanpur, Valsad, Vapi, Gondal, Veraval, Godhra, Patan, Kalol, Dahod, Botad, Amreli, Deesa, Jetpur, Dholera. Maharashtra – Mumbai, Pune, Nagpur, Thane, PCMC, Pune, Nashik, Kalyan-Dombivli, Vasai-Virar City MC, Aurangabad, Navi Mumbai, Solapur, Mira-Bhayandar, Bhiwandi-Nizampur MC, Jalgaon, Amravati, Nanded, Kolhapur, Ulhasnagar, Sangli-Miraj-Kupwad, Malegaon, Akola, Latur, Dhule, Ahmednagar, Chandrapur, Parbhani, Ichalkaranji, Jalna, Ambarnath, Bhusawal, Panvel, Badlapur, Beed, Gondia, Satara, Barshi, Yavatmal, Achalpur, Osmanabad, Nandurbar, Wardha, Udgir, Hinganghat provides a range of high precision and premium quality products that are well-recognised and meet all requirements of our clients.

Customer value

  • Dhand Steels: Your Premier Steel Supplier Across India

    Dhand Steels proudly stands as the largest and most reliable supplier of steel in India. With an unwavering commitment to quality and a vast distribution network, we cater to the steel needs of industries and projects across the nation. Our reach extends to numerous cities in Maharashtra, Mumbai, Pune, Nagpur, Thane, Nashik, Aurangabad, Solapur, Amravati, Jalgaon, Kolhapur, Navi Mumbai, Akola, Latur, Dhule, Ahmednagar, Chandrapur, Parbhani, Jalna, Bhusawal, Nanded, where we play an essential role in bolstering infrastructure and development. In Gujarat, our steel empowers progress in Ahmedabad, Surat, Vadodara, Rajkot, Bhavnagar, Jamnagar, Junagadh, Gandhinagar, Anand, Nadiad, Morbi, Bharuch, Gandhidham, Surendranagar, Mehsana, Vapi, Navsari, Veraval, Porbandar, Godhra, contributing to the state’s industrial prowess. In Telangana, our steel is integral to the growth of Hyderabad, Warangal, Nizamabad, Karimnagar, Ramagundam, Khammam, Mahbubnagar, Nalgonda, Adilabad, Siddipet, Miryalaguda, Secunderabad, Jagtial, Nirmal, Suryapet, Wanaparthy, Mancherial, Bhongir, Kamareddy, Medak. Tamil Nadu’s key cities like Chennai, Coimbatore, Madurai, Tiruchirappalli, Salem, Tirunelveli, Vellore, Erode, Thanjavur, Dindigul, Cuddalore, Kanchipuram, Tiruppur, Tuticorin, Nagercoil, Hosur, Pollachi, Rajapalayam, Karaikudi, Neyveli, Pudukkottai, Ambur, Nagapattinam, Tindivanam, Virudhachalam, Arakkonam, Krishnagiri, Dharmapuri, Sivakasi, Villupuram, Kumbakonam, Mayiladuthurai, Ranipet, Tenkasi. rely on us for the structural backbone of their advancement.

    Moreover, Dhand Steels extends its influence beyond these states. From the culturally rich heritage of Rajasthan to the fertile landscapes of Punjab, and from the vibrant milieu of West Bengal to the serene beauty of Kerala, our steel traverses the diverse topography of India, fortifying dreams and aspirations.

    Global Reach: Connecting Continents through Quality Steel

    At Dhand Steels, our dedication to excellence knows no boundaries. Beyond Indian borders, our products find their way into international markets, shaping skylines and industries around the world. Our steel graces structures in the USA, supports innovation in England, fuels progress in Thailand, and contributes to development in Mexico and Brazil. Across the African continent, our steel reinforces foundations, while in Dubai and other Middle Eastern countries, it forms the backbone of visionary projects.

    Our commitment to quality, reliability, and innovation has propelled Dhand Steels to the forefront of the steel industry. As we continue to expand our horizons, we take pride in being more than just a supplier; we are a partner in growth, a catalyst for development, and a beacon of strength for projects worldwide.

    why choose dhand steels

    • 100% flaw-free bright bars
    • Money-back guarantee
    • Premium quality
    • testing Surface finishing
    • On-time delivery

Get in touch

    Dhand Steels

    Setting up our base in the late 70’s, at Ludhiana (Punjab, India), we, “Dhand Steel Traders”, are successfully recognized as an eminent manufacturer, and supplier of a broad range of high precision premium quality straightened and aligned Bright Bars, Metal Bars, Alloy Steel Bright Bars and Special Shaped Bright Bars.

    Get in touch

    Working hours

    • Weekdays 9:00 – 18:00
    • Saturday 9:00 – 17:00
    • Sunday Closed

    Follow Us

    Call Now Button