Contacts

IS 2062 E350 Bright Bar Chemical Composition

IS 2062 E350 is a mild steel grade commonly used in the Indian standards for structural steel. The chemical composition of IS 2062 E350 bright bar typically includes:

Carbon (C): 0.2% max

Manganese (Mn): 1.5% max

Phosphorus (P): 0.04% max

Sulphur (S): 0.04% max

Silicon (Si): 0.4% max

Copper (Cu): 0.4% max

Nickel (Ni): 0.4% max

Chromium (Cr): 0.4% max

Molybdenum (Mo): 0.1% max

These are approximate ranges, as the exact composition can vary depending on the specific grade of IS 2062 E350 steel being used.

It is important to note that IS 2062 E350 is a structural steel grade, which is typically used in construction and fabrication industries. This grade is known for its excellent welding properties and good formability. It is suitable for applications where the high strength and toughness are not required.

IS 2062 E350 Bright Bar Physical Properties

The physical properties of IS 2062 E350 bright bar can vary depending on the specific grade and manufacturing process used. However, some typical physical properties of IS 2062 E350 steel include:

Density: 7.85 g/cm3

Melting point: 1450-1510 °C (2642-2750 °F)

Thermal conductivity: 43 W/m.K at 20°C

Thermal expansion: 12.2 x 10⁻⁶/°C at 20-100°C

It is important to note that these are approximate values, and the actual properties may vary depending on the specific grade and manufacturing process used.

IS 2062 E350 is a structural steel grade, which is typically used in construction and fabrication industries. This grade is known for its excellent welding properties and good formability. It is suitable for applications where the high strength and toughness are not required. The IS 2062 E350 steel is widely used in the construction of multi-storey buildings, bridges, industrial buildings, and other similar structures.

IS 2062 E350 Bright Bar Mechanical Properties

The mechanical properties of IS 2062 E350 bright bar can vary depending on the specific grade and manufacturing process used. However, some typical mechanical properties of IS 2062 E350 steel include:

Tensile strength: ≥410 MPa (≥60 ksi)

Yield strength: ≥250 MPa (≥36 ksi)

Elongation: ≥20%

Impact strength (Charpy V-notch): ≥27 J (≥20 ft-lb) at -20°C (-4°F)

It is important to note that these are approximate values and the actual properties may vary depending on the specific grade and manufacturing process used. Additionally, the mechanical properties may change after heat treatment and surface treatments such as hardening and tempering.

IS 2062 E350 is a structural steel grade that is typically used in construction and fabrication industries. This grade is known for its excellent welding properties and good formability. The IS 2062 E350 steel is widely used in the construction of multi-storey buildings, bridges, industrial buildings, and other similar structures.

IS 2062 E350 Bright Bar Shapes

IS 2062 E350 bright bar is available in a variety of shapes to meet the needs of different applications. Some common shapes of IS 2062 E350 bright bar include:

Round bar: The most common shape of bright bar, round bars are available in a wide range of diameters and lengths. They are typically used in applications such as shafts, gears, and other mechanical components.

Flat bar: Flat bars are rectangular-shaped bars that are available in a variety of widths and thicknesses. They are often used in applications such as machine tools, gears, and other mechanical components.

Hexagonal bar: Hexagonal bars are six-sided bars that are available in a variety of sizes. They are often used in applications such as shafts, gears, and other mechanical components.

Square bar: Square bars are four-sided bars that are available in a variety of sizes. They are often used in applications such as machine tools, gears, and other mechanical components.

Rectangular bar: Rectangular bars are rectangular-shaped bars that are available in a variety of sizes. They are often used in applications such as machine tools, gears, and other mechanical components.

IS 2062 E350 bright bar can be customized to suit specific requirements and applications.

IS 2062 E350 Bright Bar Sizes

IS 2062 E350 bright bar is available in a wide range of sizes to meet the needs of different applications. The size of bright bar typically refers to the diameter or cross-sectional dimension. The size of round bars can range from as small as 2mm to as large as 200mm and beyond, depending on the application.

For other shapes, the size will refer to the width, thickness, and length. For example, a flat bar can range from as small as 2mm x 10mm x 1000mm to as large as 100mm x 150mm x 6000mm.

IS 2062 E350 bright bar can be customized to suit specific requirements and applications.

IS 2062 E350 Bright Bar Equivalent Grades

IS 2062 E350 is a mild steel grade commonly used in the Indian standards for structural steel. The equivalent grades of IS 2062 E350 bright bar include:

S235J2W+N

S355J2W+N

S355J0W

S355K2W+N

S355J2W+N

ASTM A572 Gr 50

ASTM A709 Gr 50

These are equivalent grades to IS 2062 E350 and are recognized by different international standards organizations. The chemical composition and mechanical properties of these grades are similar to that of IS 2062 E350. It is important to note that, while these grades are equivalent, they may have slight variations in composition and properties depending on the specific standard.

 

Our organization is an ISO 9001:2015 ensured brilliant bar producer, exhibiting the unrivaled nature of the relative multitude of stocks it produces. To ensure that its items are protected with utilization, the organization likewise complies with extra security guidelines including HACCP.

Our Supply Cities

Ahmedabad, Surat, Vadodara, Rajkot, Bhavnagar, Jamnagar, Gandhinagar, Junagadh, Gandhidham, Anand, Navsari, Morbi, Nadiad, Surendranagar, Bharuch, Mehsana, Bhuj, Porbandar, Palanpur, Valsad, Vapi, Gondal, Veraval, Godhra, Patan, Kalol, Dahod, Botad, Amreli, Deesa, Jetpur, Dholera. Maharashtra – Mumbai, Pune, Nagpur, Thane, PCMC, Pune, Nashik, Kalyan-Dombivli, Vasai-Virar City MC, Aurangabad, Navi Mumbai, Solapur, Mira-Bhayandar, Bhiwandi-Nizampur MC, Jalgaon, Amravati, Nanded, Kolhapur, Ulhasnagar, Sangli-Miraj-Kupwad, Malegaon, Akola, Latur, Dhule, Ahmednagar, Chandrapur, Parbhani, Ichalkaranji, Jalna, Ambarnath, Bhusawal, Panvel, Badlapur, Beed, Gondia, Satara, Barshi, Yavatmal, Achalpur, Osmanabad, Nandurbar, Wardha, Udgir, Hinganghat provides a range of high precision and premium quality products that are well-recognised and meet all requirements of our clients.