IS 2062 E250 Bright Bars

IS 2062 E250 Bright Bar Chemical Composition

IS 2062 E250 is a mild steel grade commonly used in the Indian standards for structural steel. The chemical composition of IS 2062 E250 bright bar typically includes:

Carbon (C): 0.20 – 0.25%
Manganese (Mn): 0.70 – 1.00%
Phosphorus (P): 0.035% max
Sulphur (S): 0.035% max
Silicon (Si): 0.35% max
Copper (Cu): 0.20% max
Nickel (Ni): 0.20% max
Chromium (Cr): 0.20% max
Molybdenum (Mo): 0.10% max

These are approximate ranges, as the exact composition can vary depending on the specific grade of IS 2062 E250 steel being used.

It is important to note that IS 2062 E250 is a mild steel grade, which is typically used in construction and fabrication industries. This grade is known for its good formability and excellent welding properties. It is suitable for applications where the high strength and toughness are not required.

IS 2062 E250 Bright Bar Physical Properties

The physical properties of IS 2062 E250 bright bar can vary depending on the specific grade. However, some typical physical properties of IS 2062 E250 steel include:

Density: 7.85 g/cm3
Melting point: 1450-1510 °C (2642-2750 °F)
Thermal conductivity: 43 W/m.K at 20°C
Thermal expansion: 12.2 x 10⁻⁶/°C at 20-100°C

It is important to note that these are approximate values and the actual properties may vary depending on the specific grade and manufacturing process used.

IS 2062 E250 is a mild steel grade that is typically used in construction and fabrication industries. This grade is known for its good formability and excellent welding properties. It is suitable for applications where the high strength and toughness are not required. This grade is widely used in the construction of structures such as sheds, warehouses, and other similar structures.

 

IS 2062 E250 Bright Bar Mechanical Properties

The mechanical properties of IS 2062 E250 bright bar can vary depending on the specific grade and manufacturing process used. However, some typical mechanical properties of IS 2062 E250 steel include:

Tensile strength: ≥250 MPa (≥36 ksi)
Yield strength: ≥205 MPa (≥30 ksi)
Elongation: ≥20%
Impact strength (Charpy V-notch): ≥27 J (≥20 ft-lb) at -20°C (-4°F)

It is important to note that these are approximate values and the actual properties may vary depending on the specific grade and manufacturing process used. Additionally, the mechanical properties may change after heat treatment and surface treatments such as hardening and tempering.

IS 2062 E250 is a mild steel grade that is typically used in construction and fabrication industries. This grade is known for its good formability and excellent welding properties. It is suitable for applications where the high strength and toughness are not required. This grade is widely used in the construction of structures such as sheds, warehouses, and other similar structures.

IS 2062 E250 Bright Bar Shapes

IS 2062 E250 bright bar is available in a variety of shapes to meet the needs of different applications. Some common shapes of IS 2062 E250 bright bar include:

Round bar: The most common shape of bright bar, round bars are available in a wide range of diameters and lengths. They are typically used in applications such as shafts, gears, and other mechanical components.

Flat bar: Flat bars are rectangular-shaped bars that are available in a variety of widths and thicknesses. They are often used in applications such as machine tools, gears, and other mechanical components.

Hexagonal bar: Hexagonal bars are six-sided bars that are available in a variety of sizes. They are often used in applications such as shafts, gears, and other mechanical components.

Square bar: Square bars are four-sided bars that are available in a variety of sizes. They are often used in applications such as machine tools, gears, and other mechanical components.

Rectangular bar: Rectangular bars are rectangular-shaped bars that are available in a variety of sizes. They are often used in applications such as machine tools, gears, and other mechanical components.

IS 2062 E250 bright bar can be customized to suit specific requirements and applications.

IS 2062 E250 Bright Bar Sizes

IS 2062 E250 bright bar is available in a wide range of sizes to meet the needs of different applications. The size of bright bar typically refers to the diameter or cross-sectional dimension. The size of round bars can range from as small as 2mm to as large as 200mm and beyond, depending on the application and the manufacturer.

For other shapes, the size will refer to the width, thickness, and length. For example, a flat bar can range from as small as 2mm x 10mm x 1000mm to as large as 100mm x 150mm x 6000mm.

IS 2062 E250 bright bar can be customized to suit specific requirements and applications.

IS 2062 E250 Bright Bar Equivalent Grades

IS 2062 E250 is a mild steel grade commonly used in the Indian standards for structural steel. The equivalent grades of IS 2062 E250 bright bar include:

ASTM A36
JIS SS400
DIN ST37-2
GB Q235B
EN S235JR

These are equivalent grades to IS 2062 E250 and are recognized by different international standards organizations. The chemical composition and mechanical properties of these grades are similar to that of IS 2062 E250. It is important to note that, while these grades are equivalent, they may have slight variations in composition and properties depending on the specific standard

 

Our organization is an ISO 9001:2015 ensured brilliant bar producer, exhibiting the unrivaled nature of the relative multitude of stocks it produces. To ensure that its items are protected with utilization, the organization likewise complies with extra security guidelines including HACCP.

Our Supply Cities

Ahmedabad, Surat, Vadodara, Rajkot, Bhavnagar, Jamnagar, Gandhinagar, Junagadh, Gandhidham, Anand, Navsari, Morbi, Nadiad, Surendranagar, Bharuch, Mehsana, Bhuj, Porbandar, Palanpur, Valsad, Vapi, Gondal, Veraval, Godhra, Patan, Kalol, Dahod, Botad, Amreli, Deesa, Jetpur, Dholera. Maharashtra – Mumbai, Pune, Nagpur, Thane, PCMC, Pune, Nashik, Kalyan-Dombivli, Vasai-Virar City MC, Aurangabad, Navi Mumbai, Solapur, Mira-Bhayandar, Bhiwandi-Nizampur MC, Jalgaon, Amravati, Nanded, Kolhapur, Ulhasnagar, Sangli-Miraj-Kupwad, Malegaon, Akola, Latur, Dhule, Ahmednagar, Chandrapur, Parbhani, Ichalkaranji, Jalna, Ambarnath, Bhusawal, Panvel, Badlapur, Beed, Gondia, Satara, Barshi, Yavatmal, Achalpur, Osmanabad, Nandurbar, Wardha, Udgir, Hinganghat provides a range of high precision and premium quality products that are well-recognised and meet all requirements of our clients.

Customer value

  • Surface finishing—without centerless grinding, belt polishing to Ra = 0.2 um (12 RMS), and grit polishing to with 180 grit.
  • 100% crack free bright bars—A magnetic particle inspection (MPI) test is conducted on every bright bar to verify that there is no crack and the bright bar is made crack-free. 
  • Premium quality testing- A high degree of safety is assured by using high ductility bolstering steel that is not brittle. In more than 100 steel grades, the products are exported to more than 50 countries.
  • Our company is one of the best manufacturers of C-20 round bars in India and can offer the best value. In addition, we keep a large stock of round bars manufactured in Maharashtra, Pune, Aurangabad, Pune, Nashik, Mumbai, Nagpur, Thane, Faridabad, Delhi NCR, Gujarat, Tamil Nadu etc., for our stocking wholesalers.

Get in touch

    Dhand Steels

    Setting up our base in the late 70’s, at Ludhiana (Punjab, India), we, “Dhand Steel Traders”, are successfully recognized as an eminent manufacturer, and supplier of a broad range of high precision premium quality straightened and aligned Bright Bars, Metal Bars, Alloy Steel Bright Bars and Special Shaped Bright Bars.

    Get in touch

    Working hours

    • Weekdays 9:00 – 18:00
    • Saturday 9:00 – 17:00
    • Sunday Closed

    Follow Us

    Call Now Button