EN 45 Bright Bars
EN 45 Bright Bar Chemical Composition
EN 45 is a type of bright steel bar that is often used in the production of gears, shafts, and other mechanical components. The chemical composition of EN 45 bright steel typically includes:
Carbon (C): 0.45%
Manganese (Mn): 0.60-0.90%
Silicon (Si): 0.10-0.35%
Sulfur (S): 0.035% max
Phosphorus (P): 0.035% max
EN 45 Bright Bar Physical Properties
The physical properties of EN 45 bright steel bar can vary depending on the specific manufacturing process and heat treatment used. However, some general properties of EN 45 bright steel include:
- Density: 7.85 g/cm3
- Tensile strength: 800 – 1000 MPa
- Yield strength: 600 MPa
- Elongation: 15 – 20%
- Hardness: HRC 40-45
It is also important to note that the physical properties of EN 45 bright steel can be affected by factors such as temperature, stress, and the rate of loading, and can vary depending on the specific application for which it is being used.
EN 45 Bright Bar Mechanical Properties
The mechanical properties of EN 45 bright steel bar can vary depending on the specific manufacturing process and heat treatment used. However, some general mechanical properties of EN 45 bright steel include:
Tensile strength: 800 – 1000 MPa
Yield strength: 600 MPa
Elongation: 15 – 20%
Hardness: HRC 40-45
Impact strength: 20 J (at room temperature)
It is also important to note that the mechanical properties of EN 45 bright steel can be affected by factors such as temperature, stress, and the rate of loading, and can vary depending on the specific application for which it is being used.
It is a high carbon steel which have good hardenability, good wear resistance and high compressive strength.
EN 45 Bright Bar Shapes
EN 45 bright steel bar is available in a variety of shapes, including round, square, hexagonal, and flat. The most common shape is round, with diameters ranging from 3mm to 130mm. It is also available in square, hexagonal and flat shapes. The size and shape of the bar can be customized to meet the specific needs of the application.
EN 45 bright steel bar can also be produced in custom shapes and sizes to meet specific requirements. The bar is typically supplied in the as-drawn or as-rolled condition, but can also be supplied in heat-treated condition, depending on the application. Some common forms of EN 45 bright steel bar are:
Round bars
Square bars
Flat bars
Hexagonal bars
Profiles
Shafts
Spindles
It is mainly used for manufacturing gears, shafts and other mechanical components.
EN 45 Bright Bar Sizes
EN 45 bright steel bar is available in a range of sizes, with the most common size being round with diameters ranging from 3mm to 130mm. The size of the bar can vary depending on the specific application and the manufacturer.
EN 45 bright steel bar can also be produced in custom sizes to meet specific requirements. The size and shape of the bar can be customized to meet the specific needs of the application. For example, round bars can be produced with diameter of 3mm to 130mm, square bars can be produced in sizes ranging from 6mm to 130mm, and flat bars can be produced with thickness of 3mm to 25mm and widths of 20mm to 250mm.
EN 45 Bright Bar Equivalent Grades
EN 45 bright steel is an equivalent to the following grades:
SAE 1045
AISI 1045
UNS G10450
ASTM A29 (1045)
ASTM A510 (1045)
ASTM A576 (1045)
ASTM A682 (1045)
ASTM A829 (4140)
JIS S45C
DIN 1.1191
GB 45#
It is important to note that while these are equivalent grades, the chemical and mechanical properties may not be exactly the same and may vary depending on the specific manufacturing process and heat treatment used.
Our organization is an ISO 9001:2015 ensured brilliant bar producer, exhibiting the unrivaled nature of the relative multitude of stocks it produces. To ensure that its items are protected with utilization, the organization likewise complies with extra security guidelines including HACCP.
Our Supply Cities
Ahmedabad, Surat, Vadodara, Rajkot, Bhavnagar, Jamnagar, Gandhinagar, Junagadh, Gandhidham, Anand, Navsari, Morbi, Nadiad, Surendranagar, Bharuch, Mehsana, Bhuj, Porbandar, Palanpur, Valsad, Vapi, Gondal, Veraval, Godhra, Patan, Kalol, Dahod, Botad, Amreli, Deesa, Jetpur, Dholera. Maharashtra – Mumbai, Pune, Nagpur, Thane, PCMC, Pune, Nashik, Kalyan-Dombivli, Vasai-Virar City MC, Aurangabad, Navi Mumbai, Solapur, Mira-Bhayandar, Bhiwandi-Nizampur MC, Jalgaon, Amravati, Nanded, Kolhapur, Ulhasnagar, Sangli-Miraj-Kupwad, Malegaon, Akola, Latur, Dhule, Ahmednagar, Chandrapur, Parbhani, Ichalkaranji, Jalna, Ambarnath, Bhusawal, Panvel, Badlapur, Beed, Gondia, Satara, Barshi, Yavatmal, Achalpur, Osmanabad, Nandurbar, Wardha, Udgir, Hinganghat provides a range of high precision and premium quality products that are well-recognised and meet all requirements of our clients.
Customer value
- Surface finishing—without centerless grinding, belt polishing to Ra = 0.2 um (12 RMS), and grit polishing to with 180 grit.
- 100% crack free bright bars—A magnetic particle inspection (MPI) test is conducted on every bright bar to verify that there is no crack and the bright bar is made crack-free.
- Premium quality testing- A high degree of safety is assured by using high ductility bolstering steel that is not brittle. In more than 100 steel grades, the products are exported to more than 50 countries.
- Our company is one of the best manufacturers of C-20 round bars in India and can offer the best value. In addition, we keep a large stock of round bars manufactured in Maharashtra, Pune, Aurangabad, Pune, Nashik, Mumbai, Nagpur, Thane, Faridabad, Delhi NCR, Gujarat, Tamil Nadu etc., for our stocking wholesalers.